Isuzu Trooper Owners Club UK™

markymoan · Posted: Tue Aug 16, 2005 0:47 Post subject: timing belt light on a 2.8td 1988

just info really take the bulb out Laughing

its a pain in the butt
_________________

Google · Sponsor

suzu · **** Joined: 07 Oct 2004 Posts: 336

theres a switch on the back of the speedo housing take the shroud off undo the 4 i think screws that hold the cluster to the back pull forward slightly then using a scriber just flick it the other way job done

dani4JB1T · Posted: Tue Aug 16, 2005 20:37 Post subject:

1st: take out the meter of the dashboard.

2nd: Behind the speedo there are these bolts

3thd: You have to unbolt the KSW bolt and replace it in the other KSW hole as is show in the pic below. That hole it has a masking tape that you have to brake.

4th: Once you have the bolt in the other KSW hole your T-belt light will show "off", and will be "on" the next 100.000 Kms. Then when you need to reset it again you change the same bolt to the anoher KSW hole, and again....and again....that`s all.

_________________
all you have to do to call
is hold her hand, stand a while
and then smile and we'll understand

suzu · **** Joined: 07 Oct 2004 Posts: 336

isn't that the 3.1 procedure

dani4JB1T · Posted: Tue Aug 16, 2005 21:14 Post subject:

but according to his signature he has a 2.8... isn`t it ???

well...nevermind....that are the two ways, and both are easy

bye
_________________
all you have to do to call
is hold her hand, stand a while
and then smile and we'll understand