|
Isuzu Trooper Owners Club UK™ Isuzu Trooper, Rodeo, Bighorn, Mu & VehiCROSS Owners Club
|
View previous topic :: View next topic |
Author |
Message |
marin5451 Newbie
Joined: 05 Jan 2013 Posts: 7 Location: London
|
Posted: Mon Jul 07, 2014 10:10 Post subject: 3.0 gearbox into 3.1 engine |
|
|
Hi everyone,
I have an ISUZU 3.0 auto, i rebuilt the engine, as the trust washer was gone, hopping that will ok, only 67k mls.
I bought an 3.1 manual and converted the 3.0 completely with gearbox, drivetrain and wire harness with speedo.
Everything works as should like was on 3.1.
I'm doing a lot of motorway miles, and the 3.1 gearbox it's slower than 3.0.
At 2000 rev i have 50m/h, on 3.0 at 2000rev i headed 70m/h.
Can anyone suggest me if i will fit 3.0 manual gearbox and flywheel with clutch will be my trooper faster on motorway?
I had the 3.0 turbo fitted into 3.1 so i have more power.
Thank you in advance. |
|
Back to top |
|
|
Google Sponsor
|
Posted: Mon Jul 07, 2014 10:10 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
Gribble *******
Joined: 11 Oct 2007 Posts: 8448 Location: Holset H221W
|
Posted: Mon Jul 07, 2014 10:58 Post subject: |
|
|
I think but not 100% sure the box ratios are the same at 0.788/1 in 5th gear,not sure about the T/box though and the 3.0 auto diff is a higher ratio than the manual one (4.1 and 4.3) so you should be going a bit faster !
To check turn the engine over once in 4th gear and the prop should go round once too ,I say 4th as it will check the T/box ratios too as its 1/1 ratio .
Wilky , might be something you know a bit about like ? _________________ 2 New Troopers ! |
|
Back to top |
|
|
marin5451 Newbie
Joined: 05 Jan 2013 Posts: 7 Location: London
|
Posted: Mon Jul 07, 2014 11:35 Post subject: |
|
|
Thanks Gribble,
I will try that as the 3.0 gearbox it's on the floor.
I'm just wandering if i'l swapped how to make 4WD work as all my wire harness are from 3.1 now.
Thanks for that. |
|
Back to top |
|
|
pugbug ****
Joined: 24 May 2012 Posts: 263 Location: Leicester
|
Posted: Sat Jul 12, 2014 18:05 Post subject: |
|
|
How have you put the 3.0 turbo on the 3.1?
The flanges are different, the 3.0 has a triangluar one and the 3.1 a square one, I tried swappin the housings over, but the 3.1 exhaust housing is a misfit on the 3.0 turbo. |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|