QuoteSeek - free to use insurance comparison site

Isuzu Trooper Owners Club UK™
Isuzu Trooper, Rodeo, Bighorn, Mu & VehiCROSS Owners Club
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
CalendarCalendar  ITOCUK Club ShopClub Shop  ITOCUK Classified Ads serviceClassified Ads
ITOCUK HomeITOCUK Home   dynamic online chat serviceChatrooms  Yellow Diamond ClubsYellow Diamond Clubs

Another 3.0 to 3.1 question


 
Post new topic   Reply to topic    Isuzu Trooper Owners Club UK™ Forum Index -> Engines
View previous topic :: View next topic  
Author Message
Versatile
*


Joined: 19 Aug 2015
Posts: 49
Location: Worcestershire

PostPosted: Fri Nov 29, 2019 20:12    Post subject: Another 3.0 to 3.1 question Reply with quote

So I've got both engines and gearboxes out. I've been reading up on here about ancilliaries. Is it possible to get a 3.0 clutch plate with springs? Like to 3.1, so that I can weld up the DMF.
Also do I have to have all the extra gubbins on the 3.0 turbo exhaust as I'd like to use the turbo?

And lastly, for now, where is the oil pressure sender ?

Thanks for the help

V
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Fri Nov 29, 2019 20:12    Post subject: Google Ads keep this community free to join!


Back to top
Versatile
*


Joined: 19 Aug 2015
Posts: 49
Location: Worcestershire

PostPosted: Thu Dec 05, 2019 18:43    Post subject: My final answer Reply with quote

So after reading up on here I've decided to weld up the DMF and use the 3.1 clutch plate. I'd like the bigger one from the original but it seems it won't make that much difference.

Haven't had another dig for the oil pressure sensor yet.
Back to top
View user's profile Send personal message
Versatile
*


Joined: 19 Aug 2015
Posts: 49
Location: Worcestershire

PostPosted: Thu Dec 12, 2019 20:22    Post subject: Reply with quote

Found the pressure sensor, funnily enough, right on top of the oil filter housing.
Tagged, filed and ready to go onto the 3.1.

My engine guy says I need another head for the 3.1. Cracks between the valves. Got to do the job properly though.

I wonder if I can dismantle the 3.1 clutch plate and put the friction surface from the 3.0 onto it ?

I'll measure up and see.
Back to top
View user's profile Send personal message
Versatile
*


Joined: 19 Aug 2015
Posts: 49
Location: Worcestershire

PostPosted: Mon Mar 23, 2020 19:06    Post subject: Rebuilding a 3.1 engine Reply with quote

So I've got the engine back and started putting all the bits and pieces back on it before it goes back in the 'new' car.
There are a couple of things I'm not sure about though.
There are 2 vacuum actuator thingies on the air inlet manifold - Do I need them as they're not connected to anything on the engine I'm using currently ?

Thanks for any advice.

Ian
Back to top
View user's profile Send personal message
Display posts from previous:   
Post new topic   Reply to topic    Isuzu Trooper Owners Club UK™ Forum Index -> Engines All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group