All Wheel Drive Club

Isuzu Trooper Owners Club UKô
Isuzu Trooper, Rodeo, Bighorn, Mu & VehiCROSS Owners Club
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
CalendarCalendar  ITOCUK Club ShopClub Shop  ITOCUK Classified Ads serviceClassified Ads
ITOCUK HomeITOCUK Home   dynamic online chat serviceChatrooms  Yellow Diamond ClubsYellow Diamond Clubs

Clutch on a 1999 3.5 v6


 
Post new topic   Reply to topic    Isuzu Trooper Owners Club UKô Forum Index -> Gearbox / transmission / 4WD
View previous topic :: View next topic  
Author Message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Thu Feb 25, 2021 13:53    Post subject: Clutch on a 1999 3.5 v6 Reply with quote

Unfortunately my clutch on the trooper 3.5 v6 is on its way out after 215000 miles do they not make anything to last these days Very Happy so I need a new one but they are not cheap so I wondered if the clutch disk off a 3.0 d will fit it looks the same same dia and splines ect any one got the gm part number for just the disk from both models so I can see if its the same

Thanks Tom
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Thu Feb 25, 2021 13:53    Post subject: Google Ads keep this community free to join!


Back to top
eithan h
Moderator
Moderator


Joined: 11 Dec 2005
Posts: 8141
Location: oxfordish

PostPosted: Thu Feb 25, 2021 19:53    Post subject: Reply with quote

no as the 3.0l has dual mass flywheel so no springs in the friction plate where as the 3.5 uses a sprung friction plate
_________________
because when the dealer is no longer good enough there's still old mill motors....

old mill motors oxfordshires independent isuzu specialists.
http://www.oldmillmotorswitney.co.uk
https://www.facebook.com/OldMillMotors?fref=ts
Back to top
View user's profile Send personal message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Fri Feb 26, 2021 8:41    Post subject: Reply with quote

I did not noti ce that how very annoying I may pull it out and evaluate and see about getting it re lined hardly anyone lists one and the ones that do are eyewateringly expensive ie over 500 quid seems a lot for a clutch only thing I'm not looking forward to is the weight of the gearbox well actually I don't like doing clutches in cars anyway much its a lot easier when the engines out
Back to top
View user's profile Send personal message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Sat Feb 27, 2021 0:00    Post subject: Reply with quote

milner do one for 264 inc vat or i can get the clutch disk re lined for 35 quid
Back to top
View user's profile Send personal message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Sat Feb 27, 2021 12:23    Post subject: Reply with quote

After a bit of searching it looks like a clutch disk for a  NISSAN PATROL Y61
2000-2013 3.0 Diesel Wagon one will fit can anyone confirm this
Thanks Tom
Back to top
View user's profile Send personal message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Sun Feb 28, 2021 23:15    Post subject: Reply with quote

in case anyone is interested its an Aisin DG-020U
Back to top
View user's profile Send personal message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Mon Mar 22, 2021 22:25    Post subject: Reply with quote

Well the Nissan clutch disk fits so 60 quid for that and 60 quid for a new skf release bearing I'm gonna re use the pressure plate as that's ok any thoughts on the silly clip on the release bearing I have seen people weld in the clip and lining up the fork as they slide the gearbox on any thoughts on this

Thanks Tom
Back to top
View user's profile Send personal message
tom-madbiker
*


Joined: 11 Aug 2015
Posts: 30
Location: chesham

PostPosted: Wed Mar 24, 2021 8:27    Post subject: Reply with quote

Well I did it bit of a heavy lump that box supported one end on the jack and used a come along through the gear lever hole with a bar across the windows to lift the front into position everything clicked into place as it should well chuffed now I just have to sort the leaky exhaust
Back to top
View user's profile Send personal message
Display posts from previous:   
Post new topic   Reply to topic    Isuzu Trooper Owners Club UKô Forum Index -> Gearbox / transmission / 4WD All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group