| View previous topic :: View next topic |
| Author |
Message |
montifub
****
Joined: 12 Nov 2009
Posts: 330
Location: Linton KENT
|
 Posted: Sat Dec 19, 2009 21:31 Post subject: fault code c3500 ??? |
 |
|
| Can anybody tell me what fault code C3500 is related too please |
|
| Back to top |
|
 |
Google
Sponsor
|
| Posted: Sat Dec 19, 2009 21:31 Post subject: Google Ads keep this community free to join! |
|
|
|
|
| Back to top |
|
|
Gribble
*******
Joined: 11 Oct 2007
Posts: 8448
Location: Holset H221W
|
| Posted: Tue Dec 22, 2009 20:09 Post subject: |
|
|
Would need to know car model and year to narrow it down a bit but the C is chassis related.
_________________
2 New Troopers ! |
|
| Back to top |
|
|
Gribble
*******
Joined: 11 Oct 2007
Posts: 8448
Location: Holset H221W
|
| Posted: Tue Dec 22, 2009 20:35 Post subject: |
|
|
C codes stop at 1788 , are you sure thats what your reading ?
_________________
2 New Troopers ! |
|
| Back to top |
|
|
eithan h
Moderator
Joined: 11 Dec 2005
Posts: 8195
Location: oxfordish
|
| Posted: Tue Dec 22, 2009 21:11 Post subject: |
|
|
| must be an after market scanner or tech2 would have given a description of what it was |
|
| Back to top |
|
|
montifub
****
Joined: 12 Nov 2009
Posts: 330
Location: Linton KENT
|
| Posted: Wed Dec 30, 2009 20:28 Post subject: |
|
|
| Hi, 1999 3.0L TD trooper Duty |
|
| Back to top |
|
|
Gribble
*******
Joined: 11 Oct 2007
Posts: 8448
Location: Holset H221W
|
| Posted: Wed Dec 30, 2009 20:47 Post subject: |
|
|
I do not see that code in the Trooper manual , could you say what the fault is ?
_________________
2 New Troopers ! |
|
| Back to top |
|
|
montifub
****
Joined: 12 Nov 2009
Posts: 330
Location: Linton KENT
|
| Posted: Sun Jan 03, 2010 11:33 Post subject: |
|
|
| sorry, I don't know, have trouble with remote controls, had air bag fault and 4WD fault, now my code reader is not communicating with ECU so i cannot see if codes have cleared. |
|
| Back to top |
|
|
Red Robbo
Lifetime member
Joined: 17 Feb 2008
Posts: 4129
Location: Where ever I happen to be in my imagination but mainly Far East Sussex
|
| Posted: Sun Jan 03, 2010 13:27 Post subject: |
|
|
| montifub wrote: |
| sorry, I don't know, have trouble with remote controls, had air bag fault and 4WD fault, now my code reader is not communicating with ECU so i cannot see if codes have cleared. |
Assume your code reader is not Tech II  That is the only one that will work correctly with the 3.0
Have you sorted the airbag and 4wd drive faults if not look in the general,electrical and other trooper forums,4wd look in that forum,plenty of info there especially 4wd as of late 
Re remote fob,once again plenty on here how to incar code,but if it won't then its off to the dealers and Tech II 
Hope this helps...
_________________
Khotso........... |
|
| Back to top |
|
|
Gribble
*******
Joined: 11 Oct 2007
Posts: 8448
Location: Holset H221W
|
| Posted: Sun Jan 03, 2010 13:31 Post subject: |
|
|
Ah ok . Now have a read on how to Flash the OBD plug to get a flash code to come up on the check engine light and then you can see whats up .
Much easier than using a scanner thats not tech 2 
Its not hard and if a man from Romania who says his english is bad can do it should be easy if english is your natural language ..
Put the key in to ign on press both buttons on the remote and if it gets the code it will lock/unlock the doors once. If not its tech 2 time .
_________________
2 New Troopers ! |
|
| Back to top |
|
|
|
FAQ
Search
Watched Topics
Memberlist
Usergroups
Register
Profile
Log in to check your personal messages
Log in
Calendar
Club Shop
Chatrooms
