Isuzu Trooper Owners Club UK™

[GJones]

Hi,

Hopefully someone will be able to answer this.

I want to put an extra pipe (above the level of the engine) on the diesel return pipe that comes out the back of the head, also fitting a one way valve to it.  Think the tank is pourous as I've checked everything else, diesel running back from the head over night.  This is just a stop gap till I drop the tank and fix it properly.

Just looking for the following:-

1. Where exactly on the back of the head does it come out? How do identify I have the correct pipe?
2. Is it easier to remove stuff to get at it better? i.e. air intake on the top of the engine?
3. Any other tips?

Any help would be much appreciated.

Regards

Gordon

[Google]

[Gribble]

Its the one with the white eared thumb clip  joining the rubber to the steel  fairly low down the passenger side of the engine .
_________________
2 New Troopers !

[GJones]

Thanks Gribble, I have found the pipe with the white winged connection, assuming the actually metal pipe that comes out the back of the head, comes out, then goes along and then turns again so that when it gets to the white winged connection, its actually pointing in the direction of the head rather than away from it? Hope that makes sense!

Regards

Gordon