Isuzu Trooper Owners Club UK™

CreationBlue · ** Joined: 20 Dec 2003 Posts: 85 Location: Bristol

Hi Guys/Girls

After having as much as any sane human being can take of Radio2(!!!!!!) i have invested in a new radio/cd. Trouble is i cant seam to be able to remove the old unit. I have fitted many car radios in the past but an baffled by this Jap version Mad

has anybody got any tips plssssssssssssss Question

Justin
_________________
'92 3.1 Bighorn Irmscher

Google · Sponsor

chris · ** Joined: 27 Nov 2003 Posts: 66

radio 2. arrrrwwww!
i had enough to!
i had to
.unscrew the hi/low ratio slecta handle
.unscrew the four screws on the big plastic cover (over the gear selecta)
and lift off. unplug the power/winter buttons
then there was three screws on the black surround that covers the radio, ash tray, powersocket and coin tray.
then the radio is fully accessable undo the clamps and it slides stright out.
hay presto!

good luck chris

ps that was on a 2000 swb bighorn auto

Helitrooper · Newbie Joined: 30 Dec 2003 Posts: 6

Which trooper have you got??

I've got a 3.1 Duty, and I had to take the whole facia off the dash, as the radio is bolted in - no quick release system here!
Mind you once you get in there it doesn't take long.

chris · ** Joined: 27 Nov 2003 Posts: 66

mine is a 2000 w.. swb 3.5auto

you only need to take the black facia below the aircon controls off.
its the same on most troopers.

i can send you a pic if you want..?

chris

CreationBlue · ** Joined: 20 Dec 2003 Posts: 85 Location: Bristol

Thanks for the advice guys

Weather to bad to be messing about with radios, but would appreciate a pic Chris Very Happy

Justin
_________________
'92 3.1 Bighorn Irmscher