Isuzu Trooper Owners Club UK™

dalco · * Joined: 27 Sep 2011 Posts: 22 Location: nottingham

hi
just fitted knuckle needle roller bearings and got to fitting seal got set from milners ..when i got old ones out didn't come across big metal ring thats in pic 2...
does it fit on seal as i have got it on pic 2....any input would be appreciated... thanks in advance

[img]https://www.dropbox.com/s/l3wdjj5nmxmot5h/pic%201.jpg?dl=0[/img]
[img]https://www.dropbox.com/s/5v8s1b9fu9p77v4/pic%202.jpg?dl=0[/img]

Google · Sponsor

dalco · * Joined: 27 Sep 2011 Posts: 22 Location: nottingham

hi
just fitted knuckle needle roller bearings and got to fitting seal got set from milners ..when i got old ones out didn't come across big metal ring thats in pic 2...
does it fit on seal as i have got it on pic 2....any input would be appreciated... thanks in advance

https://www.dropbox.com/s/l3wdjj5nmxmot5h/pic%201.jpg?dl=0
https://www.dropbox.com/s/5v8s1b9fu9p77v4/pic%202.jpg?dl=0

eithan h · Posted: Thu Jan 19, 2017 20:12 Post subject:

i think thats the bit that goes over the stub axle and the seal pushes up to it when you put the hub assy over the stub axle

dalco · * Joined: 27 Sep 2011 Posts: 22 Location: nottingham

hi..
thanks for the reply eithan h ..

do you know which way round it goes....thanks

eithan h · Posted: Fri Jan 20, 2017 20:20 Post subject:

the way you have it in the pic so the seal sits inside it if you know what i mean

dalco · * Joined: 27 Sep 2011 Posts: 22 Location: nottingham

all done... thanks for info...