View previous topic :: View next topic |
Author |
Message |
:::Matski::: Lifetime member
Joined: 27 Dec 2005 Posts: 5181 Location: York
|
Posted: Tue Jan 15, 2008 16:31 Post subject: |
|
|
dxmedia wrote: |
've never done a 2.8 though - only a 3.1 |
They are the same
As grandad says you only need to undo the four bolts that hold the pulley on. _________________ Front Aussie Locker - Rear LSD - Petrol Diffs
2" Lift - 1" Body lift - +2" shocks - 32" KL71s
2.5" free flow stainless system - TMIC - 20psi Boost
Suckin' Diesel Baby!
|
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Jan 15, 2008 16:31 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
likom *
Joined: 15 Jan 2008 Posts: 32 Location: SOMERSET
|
Posted: Tue Jan 15, 2008 17:01 Post subject: pully |
|
|
Grandad wrote: |
you undo the four small bolts not the large centre bolt |
There are no small bolts, only one centre bolt. I am talking about the main pully which power alternetor,fan and pump. |
|
Back to top |
|
|
dxmedia *******
Joined: 04 Mar 2007 Posts: 4677 Location: Hope Valley
|
Posted: Tue Jan 15, 2008 17:02 Post subject: |
|
|
If you put your finger right in around the lip, is there not 4 13mm bolts at 90 degrees to each other? _________________ For great insurance deals on 4x4s, imports and more, contact Adrian Flux :
01553 845 945 |
|
Back to top |
|
|
likom *
Joined: 15 Jan 2008 Posts: 32 Location: SOMERSET
|
Posted: Tue Jan 15, 2008 17:06 Post subject: pully |
|
|
dxmedia wrote: |
If you put your finger right in around the lip, is there not 4 13mm bolts at 90 degrees to each other? |
Yes you are right there are 4 bolts, so wat i have to do? |
|
Back to top |
|
|
:::Matski::: Lifetime member
Joined: 27 Dec 2005 Posts: 5181 Location: York
|
Posted: Tue Jan 15, 2008 17:09 Post subject: |
|
|
Undo them to remove the pulley..... _________________ Front Aussie Locker - Rear LSD - Petrol Diffs
2" Lift - 1" Body lift - +2" shocks - 32" KL71s
2.5" free flow stainless system - TMIC - 20psi Boost
Suckin' Diesel Baby!
|
|
Back to top |
|
|
likom *
Joined: 15 Jan 2008 Posts: 32 Location: SOMERSET
|
Posted: Tue Jan 15, 2008 17:11 Post subject: Re: pully |
|
|
likom wrote: |
dxmedia wrote: |
If you put your finger right in around the lip, is there not 4 13mm bolts at 90 degrees to each other? |
Yes you are right there are 4 bolts, so wat i have to do? |
Uff iam sweating they are tight. And is starting to rain Great |
|
Back to top |
|
|
likom *
Joined: 15 Jan 2008 Posts: 32 Location: SOMERSET
|
Posted: Tue Jan 15, 2008 17:17 Post subject: Re: pully |
|
|
likom wrote: |
likom wrote: |
dxmedia wrote: |
If you put your finger right in around the lip, is there not 4 13mm bolts at 90 degrees to each other? |
Yes you are right there are 4 bolts, so wat i have to do? |
Uff iam sweating they are tight. And is starting to rain Great |
its absolutly tiping down, looks like the end for today. Will continue tomorow - Thanks For Your help- by the way the manual is briliant |
|
Back to top |
|
|
dxmedia *******
Joined: 04 Mar 2007 Posts: 4677 Location: Hope Valley
|
Posted: Tue Jan 15, 2008 18:20 Post subject: |
|
|
You undo those 4 to get the pulley off... remember to lock everything though The are captive, so don't worry about there being a nut on the back _________________ For great insurance deals on 4x4s, imports and more, contact Adrian Flux :
01553 845 945 |
|
Back to top |
|
|
likom *
Joined: 15 Jan 2008 Posts: 32 Location: SOMERSET
|
Posted: Wed Jan 16, 2008 2:57 Post subject: |
|
|
dxmedia wrote: |
You undo those 4 to get the pulley off... remember to lock everything though The are captive, so don't worry about there being a nut on the back |
Well the belt jumped and half shreded so the timing is out ,I just hope that I will only need to replace the belt and do the timing. |
|
Back to top |
|
|
:::Matski::: Lifetime member
Joined: 27 Dec 2005 Posts: 5181 Location: York
|
Posted: Wed Jan 16, 2008 9:54 Post subject: |
|
|
The push rods are suposed to be the week point, if it comes to that. _________________ Front Aussie Locker - Rear LSD - Petrol Diffs
2" Lift - 1" Body lift - +2" shocks - 32" KL71s
2.5" free flow stainless system - TMIC - 20psi Boost
Suckin' Diesel Baby!
|
|
Back to top |
|
|
dxmedia *******
Joined: 04 Mar 2007 Posts: 4677 Location: Hope Valley
|
Posted: Wed Jan 16, 2008 9:58 Post subject: |
|
|
[quote="likom"]
dxmedia wrote: |
... remember to lock everything |
You should be ok if you were doing it by hand - It would take a hell of a forearm to bend push rods. Did you mark all of the pulleys with a dab of paint?
Retiming isn't that bad - although is the injector pump gear or belt driven - I can't remember... and it's about 5 years since I've timed an injector pump, so can't give any more advice I'm afraid _________________ For great insurance deals on 4x4s, imports and more, contact Adrian Flux :
01553 845 945 |
|
Back to top |
|
|
:::Matski::: Lifetime member
Joined: 27 Dec 2005 Posts: 5181 Location: York
|
Posted: Wed Jan 16, 2008 10:00 Post subject: |
|
|
Injector pump is belt driven and is locked with an M8 bolt. _________________ Front Aussie Locker - Rear LSD - Petrol Diffs
2" Lift - 1" Body lift - +2" shocks - 32" KL71s
2.5" free flow stainless system - TMIC - 20psi Boost
Suckin' Diesel Baby!
|
|
Back to top |
|
|
dxmedia *******
Joined: 04 Mar 2007 Posts: 4677 Location: Hope Valley
|
Posted: Wed Jan 16, 2008 10:01 Post subject: |
|
|
So if nothing was locked? or was it the bottom pulley which jumped? (In which case it's TDC to set the timing isn't it?) _________________ For great insurance deals on 4x4s, imports and more, contact Adrian Flux :
01553 845 945 |
|
Back to top |
|
|
:::Matski::: Lifetime member
Joined: 27 Dec 2005 Posts: 5181 Location: York
|
Posted: Wed Jan 16, 2008 10:03 Post subject: |
|
|
And the valves.... _________________ Front Aussie Locker - Rear LSD - Petrol Diffs
2" Lift - 1" Body lift - +2" shocks - 32" KL71s
2.5" free flow stainless system - TMIC - 20psi Boost
Suckin' Diesel Baby!
|
|
Back to top |
|
|
dxmedia *******
Joined: 04 Mar 2007 Posts: 4677 Location: Hope Valley
|
Posted: Wed Jan 16, 2008 10:07 Post subject: |
|
|
I'd be really supprised if you could bend a valve undoing the bottom bolts, would have thought that the bolt would have broken first.
Might be a suck it and see though... Sounds like the timing belt was on it's last legs if it shredded, touch wood and all.... _________________ For great insurance deals on 4x4s, imports and more, contact Adrian Flux :
01553 845 945 |
|
Back to top |
|
|
|