you dont need to set the backlash as its already set
mark the nut and pinion shaft then wind the nut off count the turns
hook the seal out tap the new seal in wind the nut on correct No of turns till marks aligned
you may need to make up a tool to stop the pinion flange turning
i have a long flat bar with two bolts in that go in the holes in the flange
Joined: 11 Jun 2005 Posts: 883 Location: Bedfordshire, UK
Posted: Thu May 25, 2006 22:37 Post subject:
Do these axles have the collapsable collar on the pinion? _________________ 1994 KZJ70 Cruiser (currently filling the garage and causing some head scratching)
1988 MKI 3.1td Hybrid Van (Ex Bobtail)
1991 SWB Fronty 2.8td Hybrid
2000 Astra Estate (work)
2006 VXR Astra
MK1 SR Nova
yes they do can replace and then torque it to the correct llbs/ft but i have done it the way i explained never had a problem the backlash is set with shims between the pinion gear and the inner bearing so unless you are stripping it right down it can`t be altered
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum