Isuzu Trooper Owners Club UK™

Pennywise · ** Joined: 19 Sep 2013 Posts: 71 Location: Derby

Hi all after a recent altenator change out and putting everything back where it came from ive noticed im missing a pipe. So the big hose from the top of the rad goes into the thermostat housing and opposite that there should be a smaller pipe which i havent got and i dont know where it should go. If i was to turn the engine over the radiator would empty out of the male conector. Hope that makes sense. This is the only thing stopping it from being back on the road. Thanks all. Matt.

Google · Sponsor

Gribble · Posted: Tue Nov 19, 2013 20:40 Post subject:

Turbo cooling return pipe ?
_________________
2 New Troopers !

Rhanagar · Posted: Wed Nov 20, 2013 8:40 Post subject:

I think your right Mr G

10mm ID hose on the 2.8/3.1 I believe
_________________
1990 Isuzu Bighorn LWB Mk.I 2.8TD Manual Lotus Edition
1994 Isuzu Bighorn LWB Mk.II 3.1TD Auto Lotus Edition

Deceased
1994 Isuzu Bighorn LWB Mk.II 3.1TD Auto LS

Pennywise · ** Joined: 19 Sep 2013 Posts: 71 Location: Derby

[img]http://

[/img]
Any ideas what pipe fits here and where it goes? Thanks

Hunter · Posted: Sat Nov 23, 2013 1:09 Post subject:

It's not the pipe hiding between the two air con pipes is it
You can just see it next to turbo and battery .
_________________

Pennywise · ** Joined: 19 Sep 2013 Posts: 71 Location: Derby

No that wasnt it. I took the air pipe off the turbo and the lost pipe was tucked away behind the turbo. Thanks again gents