|
Isuzu Trooper Owners Club UK™ Isuzu Trooper, Rodeo, Bighorn, Mu & VehiCROSS Owners Club
|
View previous topic :: View next topic |
Author |
Message |
PaulMag Newbie
Joined: 12 Oct 2015 Posts: 8 Location: Kildare Irleand
|
Posted: Sat Oct 17, 2015 13:57 Post subject: Injector Recall |
|
|
Hi
I checked with Isuzu Main Dealer if the injector recall was done on my 04 reg Trooper, the reply was yes in 2007. I had the rocker cover off today to replace the orps and noticed 1 and 4 looked newish but 2 and 3 looked old. Part No's listed below;
No.1 injector - 0000693202
No.2 injector - 0000202351
No.3 injector - 0000202368
No.4 injector - 0000695343
Have they just replaced 2 injectors instead of 4
Thanks |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sat Oct 17, 2015 13:57 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
jacksdad1963 *******
Joined: 26 Jul 2011 Posts: 1939 Location: Oldham, Lancs
|
Posted: Sat Oct 17, 2015 17:34 Post subject: |
|
|
It certainly looks like they only replacd the 2!
The guys on here know the serial numbers and when they were fitted, they should be along soon _________________ 1999 3.0 TD Duty SWB
3" Body lift, 3" suspension lift, diff dropped, balljoints flipped, extended panhard, Tree sliders, Superwinch, +2" Pro Comps, 33" Mudders: Nearly finished! |
|
Back to top |
|
|
PaulMag Newbie
Joined: 12 Oct 2015 Posts: 8 Location: Kildare Irleand
|
Posted: Sat Oct 17, 2015 20:22 Post subject: |
|
|
Thanks for your reply Jacksdad |
|
Back to top |
|
|
eithan h Moderator
Joined: 11 Dec 2005 Posts: 8195 Location: oxfordish
|
Posted: Sat Oct 17, 2015 20:34 Post subject: |
|
|
anything lower than 554264 needs to be binned really as it could mix oil and diesel within the injector |
|
Back to top |
|
|
jacksdad1963 *******
Joined: 26 Jul 2011 Posts: 1939 Location: Oldham, Lancs
|
Posted: Sat Oct 17, 2015 21:00 Post subject: |
|
|
So should the other 2 have been replaced? seems like they should have to me!
Bit late to try saving money on 3.0 warranty work after all _________________ 1999 3.0 TD Duty SWB
3" Body lift, 3" suspension lift, diff dropped, balljoints flipped, extended panhard, Tree sliders, Superwinch, +2" Pro Comps, 33" Mudders: Nearly finished! |
|
Back to top |
|
|
eithan h Moderator
Joined: 11 Dec 2005 Posts: 8195 Location: oxfordish
|
Posted: Sat Oct 17, 2015 21:05 Post subject: |
|
|
should have been but since they were done 8 yrs ago chances are they went wrong and someone sourced some from eebuygum or something not knowing what they were buying. |
|
Back to top |
|
|
PaulMag Newbie
Joined: 12 Oct 2015 Posts: 8 Location: Kildare Irleand
|
Posted: Sun Oct 18, 2015 14:30 Post subject: |
|
|
Thanks for that lads. Do Isuzu keep records of what number injectors are fitted as original equipment, if the old ones are what was fitted as OE, I may have a case against Isuzu for replacements but if they are as Eithan said, old replacements purchased from other sources, I am screwed. Will take it too Isuzu.
I am replacing injector sleeve seals at present (if I can find a sleeve removal tool), in the hope its not a cracked head. can you recommend where to get a replacement head, Milners heads any good?? |
|
Back to top |
|
|
eithan h Moderator
Joined: 11 Dec 2005 Posts: 8195 Location: oxfordish
|
Posted: Sun Oct 18, 2015 14:38 Post subject: |
|
|
no isuzu don't keep records i'd just find some good second hand ones and fit them,
millers heads are ok but remove the sleeves they come with and check for a sealant around the seals it goes rock hard and can't let them expand with heat and eventually mixes the coolant and diesel. if it's there just clean it off and use new seals |
|
Back to top |
|
|
jacksdad1963 *******
Joined: 26 Jul 2011 Posts: 1939 Location: Oldham, Lancs
|
Posted: Sun Oct 18, 2015 16:28 Post subject: |
|
|
I bought a chinese head, bolts and gasket set from a local spares shop, for about £460
The guy who owns the place said he'd sold a few over the last couple of years and no faults reported. He also said to use the full kit to keep the warranty.
Whilst building up the head I found a hole for the camshaft carrier was out of line, so I took it back, not best pleased! I got a new head within 2 days, and a head gasket and set of bolts, I still had to lap in all 16 valves once again!
That was 4 1/2 years ago and 11k miles, so would I recommend Chinese parts? Yes! _________________ 1999 3.0 TD Duty SWB
3" Body lift, 3" suspension lift, diff dropped, balljoints flipped, extended panhard, Tree sliders, Superwinch, +2" Pro Comps, 33" Mudders: Nearly finished! |
|
Back to top |
|
|
eithan h Moderator
Joined: 11 Dec 2005 Posts: 8195 Location: oxfordish
|
Posted: Sun Oct 18, 2015 16:36 Post subject: |
|
|
The milners ones had the hole out of line as well! |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|