Isuzu Trooper Owners Club UK™

darren m · Posted: Sun Jul 02, 2006 23:22 Post subject: HELP clutch problem

i lost my clutch today Crying or Very sad

the peddle just sank to the floor and could,nt change any gears .

on inspection i noticed the clutch fluid had emptied some and on following the clutch pipe to the clutch arm and what i think is a slave cylinder ( but may be wrong ) saw the fluid dripping off the end onto the floor .
i pumped the peddle and more fluid leaked out of the same place .

SO , can any one tell me how i can change the slave unit Question

is it a diy or a garage job , OR am i missing some thing and have got a different problem.
i cant see any other leaking fluid except on the end of the clutch arm / pipe area .

thanks all .
_________________
93 SWB 3.1Turbo Duty intercooler

99 LWB 3.0 TD Citation

2000 LWB 3.0 / 3.1TD Duty conversion

Google · Sponsor

Philp · Posted: Mon Jul 03, 2006 9:08 Post subject:

Most slave cylinders I've changed can be done in situ, either held in by two boltsor even just one pinch bolt. I've not looked at a trooper one but I expect it'll be accesible (although you may need slim hands!) Obviously you'll need to bleed the clutch afterwards.
_________________
Phil

96 or is it a 98 Isuzu Bighorn Lotus

darren m · Posted: Mon Jul 03, 2006 18:55 Post subject:

all sorted ( i think ) got the part from milners ( hour round trip ) , fitted it this afternoon . well pleased i didnt take it to the local garage Razz

_________________
93 SWB 3.1Turbo Duty intercooler

99 LWB 3.0 TD Citation

2000 LWB 3.0 / 3.1TD Duty conversion