Isuzu Trooper Owners Club UK™

[CreationBlue]

Hi all

Said switch dont seem to brake correctly and doesnt illuminate, and seat dosnt warm up.

Took the swich out and cleaned it up, can someone tell me if in the 'off' position the switch goes fully flat as mine seems to be in between 'on' and 'off'.

After re-assemble the switch is now illuminated constantly in both positions, tho it was getting dark so will look again in the morning...............

Any pointers please

Justin
_________________
'92 3.1 Bighorn Irmscher

[Google]

[coyletangles]

on my trooper fully forward and down switch lit up=heat, middle pos flat light off =off, fully to the rear switch lit up =keep [ it probably keeps it at a constant temp ]. It works really well on mine but only heats the lumber region hope this helps Bryan

[CreationBlue]

Thanks Bryan

My switch having taken it apart wont go fully back flat, looked like it was designed that way, tho will have a good go at it tomorrow.

Thanks for that

Justin
_________________
'92 3.1 Bighorn Irmscher

[CreationBlue]

For anyone who is interested, the switch on the Irmscher model differs from that of the Lotus in that it is a 2 position setup rather than the 3 position of the Lotus. The Lotus enjoys a 'keep' selection that i presume has a stat and will keep heat to desired setting.

Mine is now in full working order

Justin
_________________
'92 3.1 Bighorn Irmscher