Joined: 16 Nov 2004 Posts: 765 Location: NR Doncaster
Posted: Mon Dec 12, 2005 17:31 Post subject:
Hello DB ... Has it ever worked I have only suffered one problem and that is with a rear door it will open but not lock.
If you are satisfied that all the connections are OK and its possibly the unit at fault ...... you may be able to swap it with one of the others .... check with a dealer and see if the part numbers correspond.
Jon. _________________ why is the bit of wine I like always at the bottom of the bottle
Joined: 11 Dec 2005 Posts: 8195 Location: oxfordish
Posted: Mon Dec 12, 2005 20:52 Post subject:
jon have you tried screwing the lock indicator down a bit more some times on the 3.1 and 3.0l when it comes up it falls ever so slightly to one side then hits the metal bodywork of the door on the way down and stops it locking. either screw it down a bit more so it doesn't come over the metal door or angle the bottom corners a bit.
Joined: 16 Nov 2004 Posts: 765 Location: NR Doncaster
Posted: Mon Dec 12, 2005 21:10 Post subject:
Hello Eithan and a warm welcome to the Forum.... it appears you have encountered this problem before, I stripped the unit out of my door and it would appear its within the unit as it only functions one way even though there is a supply for the reverse action...... I didn't go to the extent of swapping it over with another .......... did you price one up on yours .... mines a 95 3.1 rear passengers door.
Jon. _________________ why is the bit of wine I like always at the bottom of the bottle
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum