View previous topic :: View next topic |
Author |
Message |
Twister Moderator
Joined: 21 Jul 2005 Posts: 2340 Location: Stockport
|
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Feb 07, 2006 22:58 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
lesdecks *
Joined: 20 Jan 2006 Posts: 17 Location: Stoke-on-Trent
|
Posted: Sat Feb 11, 2006 22:41 Post subject: Rear coil spacers ? |
|
|
Thanks Mr T.
Very interesting stuff.
I fancy bigger tyres to give axle ground clearance, your 275/75x16 sounds good, you say they only rub at extreme articulation. To keep costs low, would it be possible to put 1" spacers under the rear coils and wind up the fronts to match ? so giving just enough lift to clear the tyres ?
I want to keep the body lift minimal as its my day to day motor, and my mum struggles to get in at standard height !! (maybe not a bad thing !)
I wondered if some rubber spring assister type spacers were available to put under the coils ? Any ideas ?
Cheers, _________________ '92 3.1 TD LWB Lotus
Isuzu Bighorn, The Best Value 4x4 By Far |
|
Back to top |
|
|
Twister Moderator
Joined: 21 Jul 2005 Posts: 2340 Location: Stockport
|
Posted: Sun Feb 12, 2006 16:05 Post subject: |
|
|
Yes coil spacers are available, but only from independent4x in the states ( I've tried everywhere in the UK, can get them for 4x4s or LRs, but they both have different diameter springs). Much easier to fit a pair of +1.5" coil springs from Explorer UK. Check out the links in the Susp lift doc. _________________
"Tongue-tied and Twisted; just an Earth-bound misfit, I..." - PF
LTM # 000002 |
|
Back to top |
|
|
markymoan *******
Joined: 25 Jun 2005 Posts: 16267 Location: Naughty Step
|
Posted: Tue Mar 28, 2006 21:40 Post subject: |
|
|
I'm not being fussy, but
Its a link to a link then a link, would it not be easier just to put the doc here or merge the threads, i say this because i'm using dial up at the moment and its tedious to keep opening new pages _________________ |
|
Back to top |
|
|
fishertrooper *
Joined: 02 Jun 2006 Posts: 11 Location: cork, ireland
|
Posted: Wed Jul 05, 2006 11:19 Post subject: Suspensionlift |
|
|
Hi Mr Twister,
Your Link to suspension lifting is very good. I want to lift my 1994 Isuzu big horn 3.1td swb by 2 inches. I phoned Specialist Leisure Ltd and they told me, their Calmini suspension lift kits will only fit american made troopers.
He also said that on Japanese Troopers or Big Horns, that you could only lift the rear end and not the front end because the Torsion bar was 8" shorter on the Japanese models as apposed to american models.
Looking at your thread has given me great hope. Do you think the lift can be done on my Model (Japanese model).
regards
Tony. |
|
Back to top |
|
|
siweb *******
Joined: 18 Apr 2004 Posts: 1590
|
Posted: Wed Jul 05, 2006 20:36 Post subject: |
|
|
i've lifted my 97 bighorn 1" with out any problems, infact i got carried away with the torison bars and lifted the front just over 2" looked 8) but wound them back down _________________
|
|
Back to top |
|
|
markymoan *******
Joined: 25 Jun 2005 Posts: 16267 Location: Naughty Step
|
Posted: Wed Jul 05, 2006 23:40 Post subject: |
|
|
I think you can go near 3" on the front and the rear isnt a prob either _________________ |
|
Back to top |
|
|
fishertrooper *
Joined: 02 Jun 2006 Posts: 11 Location: cork, ireland
|
Posted: Wed Jul 12, 2006 8:04 Post subject: Suspension Lift |
|
|
Hi Guys,
Thats great news. Would I be right in saying that all I need is a set of bigger springs for the rear? Also, I am running 265/70/16 Tyres. Can I go any bigger/wider as I am driving in sand 10%-20% of the time.
By the way Markymoan, thanks for your help on "Loud Noises" thread.
You were right.I changed from Auto Hubs to Manual Hubs. No more Loud Bangs from front end. These Super winches are the buizz. |
|
Back to top |
|
|
Twister Moderator
Joined: 21 Jul 2005 Posts: 2340 Location: Stockport
|
Posted: Mon Jul 17, 2006 22:03 Post subject: |
|
|
I'm now running at plus 3.5 inches front and rear ( I will do a detailed write up at some point ), the front is actually the easy bit, the rear is a bit more difficult purely because of a lack of parts suppliers in this country. However, there's nothing to stop you going to a spring manufacturer and having a pair of springs made up. As for tyres, I'm running 265/75R16, and I intend to go up to 285/75R16, which is a 33" tyre. Any taller and I think gearing would become an issue. Oh, and you won't find any suppliers in this country who have much knowledge about modifying Troopers. Everything I have learnt has come from the States via numerous web sites. _________________
"Tongue-tied and Twisted; just an Earth-bound misfit, I..." - PF
LTM # 000002 |
|
Back to top |
|
|
leeanson ****
Joined: 03 Feb 2006 Posts: 351 Location: northumberland
|
Posted: Thu Sep 14, 2006 22:33 Post subject: suspension |
|
|
Mr Twister
ive been reading your post about the suspension lifts, every thing you say is perfect except when i crank my torsion bars the top of my wheels are been pushed away from the center line not getting closer, why,
also can you give me a ring please i really need to talk to you, my number is 07966875454 i will phone you straight back so it costs me ok.
thanks lee _________________ The secret is not to tighten things to tight coz you can never get the BA****DS off again. HE HE...
|
|
Back to top |
|
|
siweb *******
Joined: 18 Apr 2004 Posts: 1590
|
Posted: Thu Sep 14, 2006 22:36 Post subject: |
|
|
You turning them clockwise? and have slackened off the anti roll bar? _________________
|
|
Back to top |
|
|
leeanson ****
Joined: 03 Feb 2006 Posts: 351 Location: northumberland
|
Posted: Thu Sep 14, 2006 22:43 Post subject: |
|
|
im having majer problems since i fitted this calmini 3" lift, it has the longer upper a arms and the new bottom cross member, when it was all fitted my wheels looked like this \ / and i believe they should have been like this / \ . ive flipped th ball joints and put spacers in and they were still \ / alot aswell.
Im stuck and *beep* pissed off with it now, i think ive been given the wrong torsion bars. _________________ The secret is not to tighten things to tight coz you can never get the BA****DS off again. HE HE...
|
|
Back to top |
|
|
markymoan *******
Joined: 25 Jun 2005 Posts: 16267 Location: Naughty Step
|
Posted: Thu Sep 14, 2006 22:50 Post subject: |
|
|
Have you taken the shims out of the top wishbone ?? _________________ |
|
Back to top |
|
|
leeanson ****
Joined: 03 Feb 2006 Posts: 351 Location: northumberland
|
Posted: Thu Sep 14, 2006 22:54 Post subject: |
|
|
I have to put more shims in to bring the top of the wheels to the center line, ive got about 15 in each side.
there is something deffinatly not right, im totaly sick anyone know where in the uk someone knows about isuzu suspension lifting, _________________ The secret is not to tighten things to tight coz you can never get the BA****DS off again. HE HE...
|
|
Back to top |
|
|
markymoan *******
Joined: 25 Jun 2005 Posts: 16267 Location: Naughty Step
|
Posted: Thu Sep 14, 2006 22:55 Post subject: |
|
|
looking again, no you havnt fitted the wrong bars, its a fine line on how much lift , wich ball joint to flip etc. i'll rib into Twister and get him online when he's not at work _________________ |
|
Back to top |
|
|
|