|
Isuzu Trooper Owners Club UK™ Isuzu Trooper, Rodeo, Bighorn, Mu & VehiCROSS Owners Club
|
View previous topic :: View next topic |
Author |
Message |
mountinman41 Newbie
Joined: 16 Dec 2015 Posts: 2 Location: NEWRY NORTHERN IRELAND
|
Posted: Fri Dec 18, 2015 16:31 Post subject: trooper putting oil into diesel tank |
|
|
hi all my 3.0 trooper is mixing oil into diesel tank any ideas ..... |
|
Back to top |
|
|
Google Sponsor
|
Posted: Fri Dec 18, 2015 16:31 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
jacksdad1963 *******
Joined: 26 Jul 2011 Posts: 1939 Location: Oldham, Lancs
|
Posted: Thu Dec 24, 2015 15:56 Post subject: |
|
|
Hi, not sure what the problem is: its a very common fault on these to get cross contamination of water, oil and diesel, in any combination!
The seals on the injector sleeves fail, and as all 3 liquids are in the gallery, they mix together.
Its a pretty easy job to do, if you can work spanners fairly well, but you need a sleeve puller, or you can bodge them out with a large masonry expanding bolt.
All the seals are available, beat to get genuine Isuzu ones, costs about £40 for the lot....
Thats assuming this is the problem!
Have a search on here, there's masses of info _________________ 1999 3.0 TD Duty SWB
3" Body lift, 3" suspension lift, diff dropped, balljoints flipped, extended panhard, Tree sliders, Superwinch, +2" Pro Comps, 33" Mudders: Nearly finished! |
|
Back to top |
|
|
eithan h Moderator
Joined: 11 Dec 2005 Posts: 8195 Location: oxfordish
|
Posted: Thu Dec 24, 2015 16:30 Post subject: |
|
|
if the injectors are above the cutoff point then it's as above most likely the sleeve seals or injector seals |
|
Back to top |
|
|
jacksdad1963 *******
Joined: 26 Jul 2011 Posts: 1939 Location: Oldham, Lancs
|
Posted: Thu Dec 24, 2015 21:27 Post subject: |
|
|
let us know how you get on: 3 years ago, I was told by Isuzu that the sleeve O rings couldn't be bought on their own, and that I needed to buy new sleeves with O rings, cost me £240.
My mate in Australia got me the O ring part numbers from his Holden dealer, their Jackaroo is the same motor.
I checked with IM Group who import Isuzu motors...they had the same part numbers in stock!
I contacted my local dealer who sold me the complete sleeves, told them what I'd found out, and got a refund of £200.
Took me a lot of research and time to sort this out, so if your dealer still insists that O rings can't be bought on their own, let us know! _________________ 1999 3.0 TD Duty SWB
3" Body lift, 3" suspension lift, diff dropped, balljoints flipped, extended panhard, Tree sliders, Superwinch, +2" Pro Comps, 33" Mudders: Nearly finished! |
|
Back to top |
|
|
mountinman41 Newbie
Joined: 16 Dec 2015 Posts: 2 Location: NEWRY NORTHERN IRELAND
|
Posted: Sat Jan 09, 2016 13:22 Post subject: |
|
|
thanks for advice getting fixed this week will let you know how it goes |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|